Corsport Shortshifter+Cable Bushing questions

07k20z3ftw · 11-21-2007, 09:22 PM

http://www.corsportusa.com/store/cat...2fa52a3e5193c5

who all has this?

is this product worth buying or should i just stick with the TWM package, i plan on changing my knob to skunk2's also..if anyone has the skunk2 knob also is it lighter or heavier than stock? i think id like a little heavier knob..

OnreyJ · 11-21-2007, 10:05 PM

I have the TWM and love it...All the short shifters are pretty much the same

07k20z3ftw · 11-21-2007, 10:09 PM

all the bushings too?

OnreyJ · 11-21-2007, 10:14 PM

Got the whole set, pretty simple install. The directions are that TWM provided are pretty good, if not you can search around to find some. Im still rockin the stock knob so im not sure about the skunk2 knob

27IVTEC · 11-21-2007, 10:25 PM

Skunk konb is way heavier than stock. It weighs almost 1 pound, may not sound like a lot but trust me its heavy. It also sits alot lower on the base which= an even shorter more positive shift its worth every penny!

02civicsi · 11-21-2007, 10:37 PM

Quote:

Originally Posted by 27IVTEC

Skunk knob is way heavier than stock. It weighs almost 1 pound, may not sound like a lot but trust me its heavy. It also sits alot lower on the base which= an even shorter more positive shift its worth every penny!

Hondacivicsi23 · 11-21-2007, 10:44 PM

Skunk 2 knob isnt that much heavier than stock. I use to have one, I dont think its worth the money.

07k20z3ftw · 11-21-2007, 10:56 PM

Quote:

Originally Posted by Hondacivicsi23

Skunk 2 knob isnt that much heavier than stock. I use to have one, I dont think its worth the money.

bro u still got it? ill take it off your hands then u can see my exhaust haha

***Zeuceone*** · 11-21-2007, 11:06 PM

Skunk2 knob is worth especially when you pair it up with the corsport package. If you like a nice mechanical feel

llckll · 11-21-2007, 11:10 PM

Quote:

Originally Posted by 07k20z3ftw

http://www.corsportusa.com/store/cat...2fa52a3e5193c5

who all has this?

is this product worth buying or should i just stick with the TWM package, i plan on changing my knob to skunk2's also..if anyone has the skunk2 knob also is it lighter or heavier than stock? i think id like a little heavier knob..

I just finished installing the cable bushings from TWM. What is the small piece of sandpaper for? Moving the shifter around, it feels stiffer. I'm waiting on my short shifter to come which I ordered from Corsport. I have the Shifter base bushings here sitting on my desk. Probably install it tomorrow morning. Can someone point to me to the install DIY on the TWM site?

OnreyJ · 11-21-2007, 11:30 PM

http://www.twmperformance.com/manual...all-manual.pdf

And i belive the sandpaper was just incase the bushings were to big, you can sand them down to fit properly

Hondacivicsi23 · 11-21-2007, 11:31 PM

Quote:

Originally Posted by 07k20z3ftw

bro u still got it? ill take it off your hands then u can see my exhaust haha

nope, screwed it on...didnt like it...sold it right away. I broke even w/ my purchase so it was no biggie. I still wanna see that exhaust though.

llckll · 11-21-2007, 11:34 PM

just came back from a test drive. I can feel the stiffness a little more which makes a little more smoother. Can't wait to see what it will feel like with the shifter base bushings and short shifter...

11-21-2007, 09:22 PM	#1 (permalink)
07k20z3ftw Senior Member Join Date: Jul 2007 Location: Florida Posts: 1,051 Mitch iTrader: 0 / 0%	Corsport Shortshifter+Cable Bushing questions http://www.corsportusa.com/store/cat...2fa52a3e5193c5 who all has this? is this product worth buying or should i just stick with the TWM package, i plan on changing my knob to skunk2's also..if anyone has the skunk2 knob also is it lighter or heavier than stock? i think id like a little heavier knob..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY part II: Cable Shifter bushings (Big Pictures inside)	atruhondagrl	Transmission	77	08-24-2008 08:28 PM
injen sri and shifter cable bushing question! T . T	chouj604	Bolt-Ons And All-Motor	7	02-04-2007 01:12 PM
One FREE CorSport Shifter Cable Bushing Set	CorSport	CorSport	26	08-28-2006 09:01 PM

11-21-2007, 10:05 PM	#2 (permalink)
OnreyJ Member Join Date: Nov 2007 Location: Lansing MI Posts: 33 John iTrader: 0 / 0%	I have the TWM and love it...All the short shifters are pretty much the same

11-21-2007, 10:09 PM	#3 (permalink)
07k20z3ftw Senior Member Join Date: Jul 2007 Location: Florida Posts: 1,051 Mitch iTrader: 0 / 0%	all the bushings too?

11-21-2007, 10:14 PM	#4 (permalink)
OnreyJ Member Join Date: Nov 2007 Location: Lansing MI Posts: 33 John iTrader: 0 / 0%	Got the whole set, pretty simple install. The directions are that TWM provided are pretty good, if not you can search around to find some. Im still rockin the stock knob so im not sure about the skunk2 knob

11-21-2007, 10:25 PM	#5 (permalink)
27IVTEC Senior Member Join Date: Aug 2007 Location: Alabama Posts: 497 Jones iTrader: 0 / 0%	Skunk konb is way heavier than stock. It weighs almost 1 pound, may not sound like a lot but trust me its heavy. It also sits alot lower on the base which= an even shorter more positive shift its worth every penny!

11-21-2007, 10:44 PM	#7 (permalink)
Hondacivicsi23 Senior Member Join Date: Jan 2007 Location: Orlando,Fl Posts: 856 Michael iTrader: 5 / 100%	Skunk 2 knob isnt that much heavier than stock. I use to have one, I dont think its worth the money.

11-21-2007, 11:30 PM	#11 (permalink)
OnreyJ Member Join Date: Nov 2007 Location: Lansing MI Posts: 33 John iTrader: 0 / 0%	http://www.twmperformance.com/manual...all-manual.pdf And i belive the sandpaper was just incase the bushings were to big, you can sand them down to fit properly

11-21-2007, 11:34 PM	#13 (permalink)
llckll Senior Member Join Date: Jun 2007 Posts: 401 iTrader: 0 / 0%	just came back from a test drive. I can feel the stiffness a little more which makes a little more smoother. Can't wait to see what it will feel like with the shifter base bushings and short shifter...