si 4dr exaust?

vtecsir85 · 11-10-2007, 02:24 AM

i want to buy a exaust for my car but i cant figure out which would fit the 4dr si.? my favorite so far is the greddy evo2 and the ti-c but would they fit? any help plz..thanks

bLaCkFA5 · 11-10-2007, 04:40 AM

any coupe exhaust will fit the FA, you just need to take it to an exhaust shop to weld a 2 inch extension.

iomatic · 11-10-2007, 12:30 PM

I thought that LSD made an exhaust that fit specifically on the FA5 (cat-back). Any axle-back will work with the FA5. Correct?

vtecsir85 · 11-10-2007, 12:46 PM

thenks guys but you think a 3 inch pipng would b good just with headers and intake? or this affect any power?

02civicsi · 11-10-2007, 02:31 PM

If you want 3inch then there is a member who is selling his 3inch AJP exhaust & IIRC it looks like you don't live too far from him either. PM civicsi1217 about it.

mccallistersi · 11-10-2007, 08:33 PM

I should be getting a 3 inch cat back from Turbo-Mafia sometime this week, I'll let you know how it sounds and performs. I cant wait lol.

02civicsi · 11-10-2007, 09:30 PM

Did you get the over or under the rear LCA?

***NitrousG35*** · 11-10-2007, 09:57 PM

Turbo Mafia offers a direct bolt on for the FA5. I ordered a system with 2.5 pipe, resonator and Magnaflow oval muffler. I got mine over the LCA. You should check them out before you order anything.

***sh33t_0f_p4p3r*** · 11-10-2007, 10:43 PM

Quote:

Originally Posted by vtecsir85

thenks guys but you think a 3 inch pipng would b good just with headers and intake? or this affect any power?

it will be nominal

mccallistersi · 11-10-2007, 10:43 PM

I got the 3 inch, 0 resonator, JDM angle (under the LCA) with a turbo mafia n1 muffler. Should be LOUD, which is what I'm going for. As far as other systems for the Sedan, I know of only one besides Turbo-Mafia. Its the Legal Speed Design, which sounds sick on you tube. Anyone have any prospects of what my setup will sound like. I cant wait lol.

11-10-2007, 02:24 AM	#1 (permalink)
vtecsir85 Member Join Date: Jul 2007 Location: miramar fl. Posts: 57 Jonathan iTrader: 0 / 0%	si 4dr exaust? i want to buy a exaust for my car but i cant figure out which would fit the 4dr si.? my favorite so far is the greddy evo2 and the ti-c but would they fit? any help plz..thanks

11-10-2007, 08:33 PM	#6 (permalink)
mccallistersi Junior Member Join Date: Aug 2007 Location: Enid Oklahoma Posts: 18 Stephen McCallister iTrader: 0 / 0%	3 inch exhaust I should be getting a 3 inch cat back from Turbo-Mafia sometime this week, I'll let you know how it sounds and performs. I cant wait lol.

11-10-2007, 09:57 PM	#8 (permalink)
*NitrousG35* Mr. Cowl Induction Join Date: May 2007 Location: To Infiniti and beyond... Posts: 9,824 Wild VTEC'n Bill iTrader: 3 / 100%	Turbo Mafia offers a direct bolt on for the FA5. I ordered a system with 2.5 pipe, resonator and Magnaflow oval muffler. I got mine over the LCA. You should check them out before you order anything. __________________

11-10-2007, 10:43 PM	#10 (permalink)
mccallistersi Junior Member Join Date: Aug 2007 Location: Enid Oklahoma Posts: 18 Stephen McCallister iTrader: 0 / 0%	I got the 3 inch, 0 resonator, JDM angle (under the LCA) with a turbo mafia n1 muffler. Should be LOUD, which is what I'm going for. As far as other systems for the Sedan, I know of only one besides Turbo-Mafia. Its the Legal Speed Design, which sounds sick on you tube. Anyone have any prospects of what my setup will sound like. I cant wait lol. Last edited by mccallistersi; 11-10-2007 at 11:58 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-10-2007, 04:40 AM	#2 (permalink)
bLaCkFA5 Senior Member Join Date: Apr 2007 Location: SoCal 626/909 Age: 19 Posts: 512 iTrader: 1 / 100%	any coupe exhaust will fit the FA, you just need to take it to an exhaust shop to weld a 2 inch extension.

11-10-2007, 12:30 PM	#3 (permalink)
iomatic Senior Member Join Date: Apr 2007 Age: 37 Posts: 1,521 iTrader: 0 / 0%	I thought that LSD made an exhaust that fit specifically on the FA5 (cat-back). Any axle-back will work with the FA5. Correct?

11-10-2007, 12:46 PM	#4 (permalink)
vtecsir85 Member Join Date: Jul 2007 Location: miramar fl. Posts: 57 Jonathan iTrader: 0 / 0%	thenks guys but you think a 3 inch pipng would b good just with headers and intake? or this affect any power?

11-10-2007, 02:31 PM	#5 (permalink)
02civicsi Senior Member Join Date: Jan 2007 Location: Longwood, FL Posts: 7,119 I am the Juggernaut!!! iTrader: 18 / 100%	If you want 3inch then there is a member who is selling his 3inch AJP exhaust & IIRC it looks like you don't live too far from him either. PM civicsi1217 about it.

11-10-2007, 09:30 PM	#7 (permalink)
02civicsi Senior Member Join Date: Jan 2007 Location: Longwood, FL Posts: 7,119 I am the Juggernaut!!! iTrader: 18 / 100%	Did you get the over or under the rear LCA?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY '07 Si 4DR JDM/red badges	SOLO8thGenSi	Exterior Style Mods	118	09-05-2008 11:48 PM
2006+ Civic 4dr VIS Lip Kit	AutoCity	Auto City Imports	70	07-30-2008 04:41 AM
Civic 4DR sideview mirrors	Mitrofan	Inside and Out	3	07-14-2007 08:54 AM
Soon (Well 8 weeks) to be 4dr Si with Navi	Jab31169	Introduction & Pictures	4	06-17-2007 12:40 AM