anyone seen this intake??

tkellymn · 08-19-2007, 05:11 PM

https://www.gruppem.co.jp/onlinestor...roducts_id=137

I am wondering what the differecne is between that car and our SI's. what would it take to make that fit our cars?

k20beast · 08-19-2007, 05:14 PM

doubt the mount/brackets are the same...

jsb03f · 08-19-2007, 05:34 PM

call em up!! thats hot right there! If you gonna stay NA

alexv305 · 08-19-2007, 05:56 PM

gotta be honest it looks awesome

Gr3y Goose · 08-19-2007, 06:04 PM

its for the ep3, it probably wont fit so well without some mods otherwise theyd have it for the fg

**twistedframe** · 08-19-2007, 06:07 PM

ep3 does not use a maf sensor, so you would have to find a way to mount the sensor.

Gr3y Goose · 08-19-2007, 06:08 PM

Quote:

Originally Posted by twistedframe

ep3 does not use a maf sensor, so you would have to find a way to mount the sensor.

uh, you sure?..im pretty positive my old ep3 had one

**twistedframe** · 08-19-2007, 06:16 PM

Quote:

Originally Posted by Gr3y Goose

uh, you sure?..im pretty positive my old ep3 had one

i am pretty sure they don't but I have been wrong before. I thought the ep3's used a speed density air metering system (w/ a map sensor instead of maf sensor)

I just did a search for a maf sensor for an ep3 and couldn't find one.

k20beast · 08-19-2007, 06:17 PM

idk for sure but id say they do..

bulletSisedan · 08-19-2007, 06:24 PM

nope no maf on the ep if so we would have alot more after market and what not. If there is I never noticed it lol.

***FijiPhil*** · 08-19-2007, 08:57 PM

ep3 its like the base rsx engine doubt it would fit. still a k20 though might be worth a lil custom work.

KingMarineM16a4 · 08-19-2007, 10:20 PM

Quote:

Originally Posted by FijiPhil

ep3 its like the base rsx engine doubt it would fit. still a k20 though might be worth a lil custom work.

Mise well get injen. Or get a type S icebox and convert it.

tkellymn · 08-19-2007, 10:45 PM

I e-mailed the company asking if they could give any info on if it will fit the FG's and they responded :

Dear Sir,

Thank you for yoru inquiry.
We cannot yet tell it about the CIVIC.
If there is new information, I tell it in our Website.

Thank you

ReD4DrSiPiNoY · 01-30-2008, 09:15 PM

Bringing this tread up from the dead! PA SHO!!

https://www.gruppem.co.jp/onlinestor...roducts_id=534

i think this one should fit the FA5s....I want it!!!!

chugiboi · 01-30-2008, 09:18 PM

interesting intake.

AtomicLX · 01-30-2008, 09:23 PM

so howmuch does that equal in the ol US currrency

udumkid · 01-30-2008, 09:29 PM

Quote:

Originally Posted by AtomicLX

so howmuch does that equal in the ol US currrency

118,000 Japanese Yen = 1,108.40 U.S. Dollars

ReD4DrSiPiNoY · 01-30-2008, 09:30 PM

Quote:

Originally Posted by AtomicLX

so howmuch does that equal in the ol US currrency

its alot....including shippent from japan it is $1,250

...intake alone $1110 and shipment $141

soxfan143 · 01-30-2008, 09:45 PM

That thing is sick. That would work awesome if I could get my X intake to fit in there. I would love to know if it fits. That would stop the heat soak argument once and for all.

soxfan143 · 01-30-2008, 09:51 PM

It uses the stock tube so it looks like with a little modding that you could adapt the X intake to fit right in there. Or you could use the coupler that attatches to the Filter and just attatch it to that setup. Do you think it will fit or will it be too long? If it fits this could be the sickest intake ever. It looks like I found what I'm spending my tax return money on!!!

08-19-2007, 05:11 PM	#1 (permalink)
tkellymn Member Join Date: May 2007 Posts: 96 iTrader: 1 / 100%	anyone seen this intake?? https://www.gruppem.co.jp/onlinestor...roducts_id=137 I am wondering what the differecne is between that car and our SI's. what would it take to make that fit our cars?

08-19-2007, 08:57 PM	#11 (permalink)
*FijiPhil* ZILLLAAAAAA!!!!!!!!!! Join Date: Jun 2007 Location: Tampa Age: 19 Posts: 2,494 Phil iTrader: 0 / 0%	ep3 its like the base rsx engine doubt it would fit. still a k20 though might be worth a lil custom work. __________________ FG Squad Member #382 Tampa Crew Member #3 15% Tint///JDM FD2 Shift knob///JDM Red H emblems///Injen CAI Join the forum where you can exercise freedom of speech and say what you want -----------> http://tampastreetracing.lefora.com/forum/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Guide: Installing Injen CAI for R18 Civic	tomasro	Bolt-Ons And All-Motor	93	07-14-2008 07:53 PM
8th Gen Mugen Intake Won't Work on Si's	jdizzle37	Bolt-Ons And All-Motor	48	11-29-2007 11:27 PM
K&N 69 Series Typhoon Intake System???	Proudhalo4	Bolt-Ons And All-Motor	56	10-25-2007 09:36 AM
Be in the Dragon Meet intake/exhaust video shoot!	Cookstar	Past Dragon Meets	64	08-31-2007 11:31 AM
How to install heat shield intake gasket and bypass TB coolant on 06 si.	06redsi	Civic SI	30	08-16-2006 10:20 PM

08-19-2007, 05:14 PM	#2 (permalink)
k20beast Senior Member Join Date: Feb 2007 Location: clemson SC Age: 18 Posts: 1,156 zack iTrader: 2 / 100%	doubt the mount/brackets are the same...

08-19-2007, 05:34 PM	#3 (permalink)
jsb03f Senior Member Join Date: Feb 2007 Location: Tampa Posts: 649 Josh iTrader: 3 / 100%	call em up!! thats hot right there! If you gonna stay NA

08-19-2007, 05:56 PM	#4 (permalink)
alexv305 Senior Member Join Date: Feb 2007 Location: Tavernier Age: 20 Posts: 194 Alex Valledor iTrader: 0 / 0%	gotta be honest it looks awesome

08-19-2007, 06:04 PM	#5 (permalink)
Gr3y Goose Senior Member Join Date: Jan 2007 Location: The House that Ruth Built Age: 21 Posts: 2,538 Goose iTrader: 3 / 100%	its for the ep3, it probably wont fit so well without some mods otherwise theyd have it for the fg

08-19-2007, 06:17 PM	#9 (permalink)
k20beast Senior Member Join Date: Feb 2007 Location: clemson SC Age: 18 Posts: 1,156 zack iTrader: 2 / 100%	idk for sure but id say they do..

08-19-2007, 06:24 PM	#10 (permalink)
bulletSisedan Senior Member Join Date: Dec 2006 Location: phoenix Age: 22 Posts: 552 Jamil iTrader: 0 / 0%	nope no maf on the ep if so we would have alot more after market and what not. If there is I never noticed it lol.

08-19-2007, 10:45 PM	#13 (permalink)
tkellymn Member Join Date: May 2007 Posts: 96 iTrader: 1 / 100%	I e-mailed the company asking if they could give any info on if it will fit the FG's and they responded : Dear Sir, Thank you for yoru inquiry. We cannot yet tell it about the CIVIC. If there is new information, I tell it in our Website. Thank you

01-30-2008, 09:15 PM	#14 (permalink)
ReD4DrSiPiNoY Senior Member Join Date: Oct 2007 Location: Bartlett, IL Age: 22 Posts: 145 CJ Gutierrez iTrader: 0 / 0%	Bringing this tread up from the dead! PA SHO!! https://www.gruppem.co.jp/onlinestor...roducts_id=534 i think this one should fit the FA5s....I want it!!!!

01-30-2008, 09:18 PM	#15 (permalink)
chugiboi Senior Member Join Date: Aug 2007 Location: stockton ca Age: 22 Posts: 3,008 chue hang iTrader: 1 / 100%	interesting intake.

01-30-2008, 09:23 PM	#16 (permalink)
AtomicLX Member Join Date: Jan 2008 Location: RVA Posts: 45 iTrader: 0 / 0%	so howmuch does that equal in the ol US currrency

01-30-2008, 09:45 PM	#19 (permalink)
soxfan143 Senior Member Join Date: Nov 2007 Location: Lynnfield, MA Age: 34 Posts: 3,226 Mike iTrader: 4 / 100%	That thing is sick. That would work awesome if I could get my X intake to fit in there. I would love to know if it fits. That would stop the heat soak argument once and for all.

01-30-2008, 09:51 PM	#20 (permalink)
soxfan143 Senior Member Join Date: Nov 2007 Location: Lynnfield, MA Age: 34 Posts: 3,226 Mike iTrader: 4 / 100%	It uses the stock tube so it looks like with a little modding that you could adapt the X intake to fit right in there. Or you could use the coupler that attatches to the Filter and just attatch it to that setup. Do you think it will fit or will it be too long? If it fits this could be the sickest intake ever. It looks like I found what I'm spending my tax return money on!!!