Race Header collector sizes??

asdf · 06-26-2008, 01:05 PM

I was wondering what the collector size on all race headers' for our cars, ie: buddy club, dc, ssr, strup....etc.

I thought they would be at least 2.5"

Nexx · 06-26-2008, 01:44 PM

Need to search. I would post the links but the edge network on my phone blows.

From my recollection:

DCRH = 1.9"-2.0"
BCRH = 2.25"
Vibrant = 2.5"

All measurements are claimed inner diameter.

asdf · 06-26-2008, 01:48 PM

Quote:

Originally Posted by Nexx

Need to search. I would post the links but the edge network on my phone blows.

From my recollection:

DCRH = 1.9"-2.0"
BCRH = 2.25"
Vibrant = 2.5"

All measurements are claimed inner diameter.

I searched but nothing came up or if I searched all post there were million threads of nothing...wow, I thought all them would be 2.5". And people are still making power on smaller sizes.

But to add to this, I called Strup and they said theirs is 2".

***CorSport*** · 06-26-2008, 05:31 PM

Strup 2" collector and flange
BCRH 2" collector then a 2.5" flange
DCRH 2" collector and flange
Vibrant 2.5" collector and flange

asdf · 06-26-2008, 05:34 PM

Thank you sir.

***CorSport*** · 06-26-2008, 05:39 PM

No prob.

**NitrousG35** · 06-26-2008, 05:42 PM

Quote:

Originally Posted by CorSport

Strup 2" collector and flange
BCRH 2" collector then a 2.5" flange
DCRH 2" collector and flange
Vibrant 2.5" collector and flange

Excellent info. I added this info the Mother of all race header questions thread.

BTW, I am elated at the specs on the Vibrant. Size matters!

asdf · 06-26-2008, 05:43 PM

Would you, or anyone, happen to know the other RH size? I'm guessing they are going to be 2.5" for the price they are.

**NitrousG35** · 06-26-2008, 05:49 PM

A cursory look at the Hytech and SSR would seem to indicate a 2.5 collector and outlet flange diameter.

Bboy_Burst · 06-26-2008, 06:03 PM

does that means the vibrant makes more hp than bcrh/dcrh/strup??

2xSi · 06-26-2008, 06:14 PM

I have a DCRH in my garage. I got only 1.875" when I measured.

***CorSport*** · 06-26-2008, 06:23 PM

Quote:

Originally Posted by Bboy_Burst

does that means the vibrant makes more hp than bcrh/dcrh/strup??

No, that is not necessarily the truth. Sometimes back pressure can make more power. Every setup is going to vary a bit, different intakes, different exhausts, different mods, etc.

Tai

Nexx · 06-26-2008, 09:48 PM

Quote:

Originally Posted by 2xSi

I have a DCRH in my garage. I got only 1.875" when I measured.

My DCRH was measured at 1.9" (eye balling w/ a ruler). If what NitrousG35 says is true, the Vibrant RH may be the only true 2.5" (reasonably priced) header. :P

Bboy_Burst · 07-05-2008, 04:12 AM

Question: when i had a bcrh (2.0) with stock exhaust, i was making good power. if i use a vibrant rh (2.5), would it require a better exhaust than the stock one since the collector size is bigger?

**NitrousG35** · 07-05-2008, 09:42 AM

Quote:

Originally Posted by Bboy_Burst

Question: when i had a bcrh (2.0) with stock exhaust, i was making good power. if i use a vibrant rh (2.5), would it require a better exhaust than the stock one since the collector size is bigger?

It wouldn't hurt. I know several people who have run the stock exhaust w/the Vibrant header and have been rather disappointed by the performance.

MutantCheese · 07-05-2008, 09:56 AM

This is very interesting info. I just assumed that all aftermarket headers were at least 2.5".

***CorSport*** · 07-05-2008, 11:11 AM

Personally id go small header collector and any 60mm exhaust.

Tai

redline8500 · 07-05-2008, 12:11 PM

my dc is costom from the collector back my flex broke so i tig welded a piece of 2.25 pipe and borred out the flange as well to match my evo2 and man does she pull alot harder now

Bboy_Burst · 07-05-2008, 01:30 PM

Quote:

Originally Posted by NitrousG35

It wouldn't hurt. I know several people who have run the stock exhaust w/the Vibrant header and have been rather disappointed by the performance.

yea, it sucks to buy a header for couple $$$ and being disappointed afterward.
i wonder how the ssr or hytech header will perform with a stock exhaust.

Quote:

Originally Posted by CorSport

Personally id go small header collector and any 60mm exhaust.

Tai

how many mm is the stock exhaust??

Excalibur · 07-05-2008, 02:56 PM

Quote:

Originally Posted by Bboy_Burst

Question: when i had a bcrh (2.0) with stock exhaust, i was making good power. if i use a vibrant rh (2.5), would it require a better exhaust than the stock one since the collector size is bigger?

You could upgrade the exhaust w/ what you have now since the flange is the same size on both anyways. Same bottleneck on both headers.

06-26-2008, 01:05 PM	#1 (permalink)
asdf Senior Member Join Date: Jun 2007 Location: dallas Posts: 2,370 iTrader: 10 / 100%	Race Header collector sizes?? I was wondering what the collector size on all race headers' for our cars, ie: buddy club, dc, ssr, strup....etc. I thought they would be at least 2.5" Last edited by asdf; 06-26-2008 at 01:32 PM.

06-26-2008, 05:31 PM	#4 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 6,973 iTrader: 176 / 100%	Strup 2" collector and flange BCRH 2" collector then a 2.5" flange DCRH 2" collector and flange Vibrant 2.5" collector and flange __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined. *Check out www.SpringsOnly.com for your other vehicles.

06-26-2008, 05:39 PM	#6 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 6,973 iTrader: 176 / 100%	No prob. __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined. *Check out www.SpringsOnly.com for your other vehicles.

06-26-2008, 05:49 PM	#9 (permalink)
NitrousG35 Join Date: May 2007 Location: To Infiniti and beyond... Posts: 14,607 Wild VTEC'n Bill iTrader: 3 / 100%	A cursory look at the Hytech and SSR would seem to indicate a 2.5 collector and outlet flange diameter. __________________

07-05-2008, 11:11 AM	#17 (permalink)
*CorSport* 8thcivic Sponsor Join Date: Oct 2005 Location: Denver, Colorado Posts: 6,973 iTrader: 176 / 100%	Personally id go small header collector and any 60mm exhaust. Tai __________________ www.CorSportUSA.com Performance Aftermarket Parts Honda Performance, Defined. *Check out www.SpringsOnly.com for your other vehicles.

06-26-2008, 01:44 PM	#2 (permalink)
Nexx Senior Member Join Date: Dec 2006 Posts: 251 iTrader: 0 / 0%	Need to search. I would post the links but the edge network on my phone blows. From my recollection: DCRH = 1.9"-2.0" BCRH = 2.25" Vibrant = 2.5" All measurements are claimed inner diameter.

06-26-2008, 05:34 PM	#5 (permalink)
asdf Senior Member Join Date: Jun 2007 Location: dallas Posts: 2,370 iTrader: 10 / 100%	Thank you sir.

06-26-2008, 05:43 PM	#8 (permalink)
asdf Senior Member Join Date: Jun 2007 Location: dallas Posts: 2,370 iTrader: 10 / 100%	Would you, or anyone, happen to know the other RH size? I'm guessing they are going to be 2.5" for the price they are.

06-26-2008, 06:03 PM	#10 (permalink)
Bboy_Burst Senior Member Join Date: Jul 2007 Location: Merced, CA Age: 22 Posts: 2,002 Most Powerful N/A SI iTrader: 2 / 100%	does that means the vibrant makes more hp than bcrh/dcrh/strup??

06-26-2008, 06:14 PM	#11 (permalink)
2xSi Senior Member Join Date: Jun 2008 Posts: 229 iTrader: 0 / 0%	I have a DCRH in my garage. I got only 1.875" when I measured.

07-05-2008, 04:12 AM	#14 (permalink)
Bboy_Burst Senior Member Join Date: Jul 2007 Location: Merced, CA Age: 22 Posts: 2,002 Most Powerful N/A SI iTrader: 2 / 100%	Question: when i had a bcrh (2.0) with stock exhaust, i was making good power. if i use a vibrant rh (2.5), would it require a better exhaust than the stock one since the collector size is bigger?

07-05-2008, 09:56 AM	#16 (permalink)
MutantCheese Senior Member Join Date: Aug 2006 Location: Edge of Insanity Age: 40 Posts: 3,327 2008 NFR S2000 iTrader: 0 / 0%	This is very interesting info. I just assumed that all aftermarket headers were at least 2.5".

07-05-2008, 12:11 PM	#18 (permalink)
redline8500 Senior Member Join Date: Aug 2007 Location: Phoenix Az Age: 21 Posts: 1,272 iTrader: 3 / 100%	my dc is costom from the collector back my flex broke so i tig welded a piece of 2.25 pipe and borred out the flange as well to match my evo2 and man does she pull alot harder now Last edited by redline8500; 09-02-2008 at 03:04 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DC Sports Race Header or SSR Race Header???	LiL Sang	Bolt-Ons And All-Motor	117	08-18-2008 01:17 PM
Race header cel	bscott52789	Bolt-Ons And All-Motor	2	12-12-2007 07:31 PM
open header stock vs aftermarket (not race header)	slow4drsi	Bolt-Ons And All-Motor	1	08-10-2007 10:06 PM
DC Sports Race Header or SSR Race Header???	LiL Sang	Bolt-Ons And All-Motor	0	04-10-2007 04:49 PM
Removing Coin Collector thing????	Nomar06	Do It Yourself Articles	12	10-11-2006 11:07 PM