Check out this r-tard who claims he runs a 14.1 bone stock

[naptown08si]

YouTube - 14.181 bone stock 2007 civic Si

on top of this bull he claims to dyno 187whp. If im not mistaken that almost 10hp more than what a stock si is suppose to peak at. As a side note he also has a vid of him "beating" a S2000 from a roll. Keep in mind this is all in a stock civic.

[90b16ed]

That looks like it was altered some how. Like fast forward or something....

[NIGHTHAWKSI]

read up before you start bashing.
Baseline Dyno
Stock Dyno

[Phalanx]

he's a member on here

[naptown08si]

im not as concerned with the dyno...even with that 187hp pull he still isnt putting up enough hp for those trap speeds... if u watch the board it says his launch is 4.2 or something like that.. if at 14.1 was a good time for a stock civic why do we have people completing people that put upwards of 1500 in there car and run 14.1s just a thought. There is no way his car is stock or the board that day was falty... its just not possible im sorry.

[Phalanx]

Originally Posted by naptown08si

if at 14.1 was a good time for a stock civic why do we have people completing people that put upwards of 1500 in there car and run 14.1s just a thought

because i/h/e/tbs (which will run you roughly 1200-1500) people are still only getting just shy of 200whp. Bolt-ons dont do much for our Si's. Stock vs those... its still a drivers race.

Ill put it this way... i SUCK at driving stick... ok, well maybe i dont suck, but im VERY inexperienced. Ive only been driving it for just over 2 months. I went to the stirp this weekend and pulled a 15.005 on my first day. If I can do that... then Im sure a more experienced driver could feasibly get 14.1 in ideal conditions

[udumkid]

Originally Posted by Phalanx

because i/h/e/tbs (which will run you roughly 1200-1500) people are still only getting just shy of 200whp. Bolt-ons dont do much for our Si's. Stock vs those... its still a drivers race.

Maybe me and you should have a friendly "legal" race....

Originally Posted by Phalanx

then Im sure a more experienced driver could feasibly get 14.1 in ideal conditions

[Phalanx]

Originally Posted by udumkid

Maybe me and you should have a friendly "legal" race....

i saw your thread. i no race you

maybe 14.1 is a little 'extreme' ... but again, im inexperienced.

[atruhondagrl]

Damn that's one thick Jersey accent on that vid.

Does anyone know if that was at Atco? Atco tends to have times that are a tab bit quicker than most tracks. Don't know why. Some people say because of the denser air but I doubt that because Atco is about 107ft above sealevel and Englishtown is much different.

Either way, dude ran a 14.18. Good for him. Why do we have to knock people when they do something that we can't?

And you can beat an S2000 from a roll if the driver is clueless. S2000s aren't the fear inducing machines from God that we'd all love to imagine that they are.

[sivic_sc]

my bone stock 07 si dyno'd at 188 whp 138 trq. so..... your bashing is uncalled for.
im waiting to dyno with injen cai, and greddy ti-c installed

[Zeuceone]

owned.

[nbilyue]

That was at Cecil County Dragway, which is famous for being a "fast" track.

[Anubis]

who gives a rats ass either way......he posted enough "proof" for me

[atruhondagrl]

Turns out Imauthentic is from MD. So no, it wasn't atco. I forgot that MDers sound like they're from the delaware valley. Anyway, someone earlier this week brought up MD's tracks having "fast" times. Does anyone else remember what that was all about?


Either way, maybe the kid is that good a driver? UMDkid did a high 13s run with bolt ons. That was pretty damned impressive in my opinion. No one knocked him. Maybe he's that good a driver.

[atruhondagrl]

Originally Posted by Anubis

who gives a rats ass either way......he posted enough "proof" for me

+1
Best response yet.

[Phalanx]

Originally Posted by sivic_sc

my bone stock 07 si dyno'd at 188 whp 138 trq. so..... your bashing is uncalled for.
im waiting to dyno with injen cai, and greddy ti-c installed

-4% for SAE correction = 180.5 whp

[udumkid]

Originally Posted by atruhondagrl

Damn that's one thick Jersey accent on that vid.

Does anyone know if that was at Atco? Atco tends to have times that are a tab bit quicker than most tracks. Don't know why. Some people say because of the denser air but I doubt that because Atco is about 107ft above sealevel and Englishtown is much different.

Either way, dude ran a 14.18. Good for him. Why do we have to knock people when they do something that we can't?

And you can beat an S2000 from a roll if the driver is clueless. S2000s aren't the fear inducing machines from God that we'd all love to imagine that they are.

The guy in the S2000 didnt know how to drive....from the looks of it the kid looks like he is shifting with his left hand...come on he over revs,misses gears like crazy....

So lets settle this and for all... let the kid come and race me at the track..if he is as good as a driver or he hit 14.1 stock then he can hang with me in the 1/4 mile......

[atruhondagrl]

Originally Posted by Phalanx

-4% for SAE correction = 180.5 whp

Lol. that's what my first dyno was. Just about anyway 179.9

[udumkid]

Originally Posted by sivic_sc

my bone stock 07 si dyno'd at 188 whp 138 trq. so..... your bashing is uncalled for.
im waiting to dyno with injen cai, and greddy ti-c installed

Originally Posted by Phalanx

-4% for SAE correction = 180.5 whp

[pkkid]

OP, what the hell? Stock Si's have dyno'd with those numbers before, even someone on this thread did! And 14.1 in a stock Si isn't anything new now. It's been done and I bet people will get even faster. Who knows, Sub 14 seconds stock?

Edit: Just clicked the link. That is Imauthentic. He is authentic.