VIDEO - First Auto-X of 2008 - Page 2

Blktrax · 03-02-2008, 05:32 PM

Quote:

Originally Posted by Solo2EG

You guys don't have end cones in your stop boxes down there? or a requirement to come to a full stop? Up here you get a DNF if you don't come to a full stop in the stop box (the whole car, not just the tires...)

Nice driving BTW, that is a tight / small course, we always hear about how big the events are in the US compared to ours, I've only been to a couple of events that small!!!

The end is the stop box, of you don't come to a full stop at the sign or can't stop before it, it's a DNF.

**Nomar06** · 03-02-2008, 05:50 PM

nice vidz...

dc5jimbo · 03-02-2008, 06:00 PM

Quote:

Originally Posted by Blktrax

My second choice in music was, "You Spin me right round" by Dead or Alive.
I thought that just a lil too corny.

For $80 camera and $3 in parts to attach it to the rear center headrest, I think it worked out well.

yes it did great vid

00R101 · 03-04-2008, 04:35 AM

Try looking ahead before you exit corners. Seems like you do a good job on before corner entry but once in the corner your head doesn't turn to look for the next one until after you exit. Kinda like you are getting a little G lock. Otherwise looked good expecially on the crappy OEM tires.

Blktrax · 03-04-2008, 04:40 PM

Yea definitly gotta work on getting behind the turn point, but with only 2200 miles on the car and the first event since november, its a lil bit to get back in the groove.

07AsmFG2 · 04-02-2008, 12:33 AM

What did you use to hold the camera?

Ace23 · 04-09-2008, 09:11 AM

Nice...less than a month for me to be able to hit up the 1st one of 08

Live by SI · 04-09-2008, 05:23 PM

After seeing that your mount is obviously up to the task.

I just bought a Sony hard drive camcorder and any advice you can give on that $3 headrest mount would be appreciated.

Pics if possible?

Blktrax · 04-15-2008, 08:33 AM

I'll get pictures of the mount tonight, been busy with auto-x stuff. New video in a few days.

My mount is attached to the rear center headrest, with the camera on the passenger side, front seat layed down. I'm more focused on what my hands are doing, not just where I'm going. I used the top pf a free tripod, drilled holes in it for U bolts, and just clammped it to the headrest posts.

Googled - Very simmilar to this: CruiseCam Headrest Camera Mount

Blktrax · 04-15-2008, 02:00 PM

Here is the DIY I copied.

DIY: Camera Mount

Blktrax · 04-16-2008, 09:14 PM

My Camera Mount:

00R101 · 04-17-2008, 12:50 PM

Quote:

Originally Posted by honda93

Holy shit that lot was small. And what was up with that car parked there? Were the cones supposed to keep people from hitting it in the event something went wrong?

Being an SCCA Solo Safety Steward as well as being a chief within my region, I'm surprised the car was allowed to stay there. I won't even touch the fact about leaving 75' buffers between solid objects.

Anthony "Mario" Crea
NNJR-SCCA

Actually, Tony, its 25 feet from solid objects as long as they are not on the outside of a turn. The 75 foot rule is course to spectator distance.

But, as a safety steward, I would have had a hard time approving that course with the car there.

Regards,
Alan

honda93 · 04-17-2008, 01:07 PM

Quote:

Originally Posted by 00R101

But, as a safety steward, I would have had a hard time approving that course with the car there.

Regards,
Alan

Exactly how I was thinking... We've both seen people spin cars in some pretty creative manners at Englishtown.

Anthony "Mario" Crea
NNJR-SCCA

Blktrax · 05-05-2008, 09:28 PM

End of april - Auto-X Video

April2008 - CarDomain Video

03-02-2008, 05:50 PM	#22 (permalink)
Nomar06 mmm...what a tasty burger Join Date: Jul 2006 Location: Charlotte, NC Age: 27 Posts: 21,179 iTrader: 4 / 100%	nice vidz... __________________

04-15-2008, 08:33 AM	#29 (permalink)
Blktrax Senior Member Join Date: Dec 2007 Location: NC Age: 27 Posts: 228 Adam iTrader: 0 / 0%	I'll get pictures of the mount tonight, been busy with auto-x stuff. New video in a few days. My mount is attached to the rear center headrest, with the camera on the passenger side, front seat layed down. I'm more focused on what my hands are doing, not just where I'm going. I used the top pf a free tripod, drilled holes in it for U bolts, and just clammped it to the headrest posts. Googled - Very simmilar to this: CruiseCam Headrest Camera Mount Last edited by Blktrax; 04-15-2008 at 08:42 AM.

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/autocross-sanctioned-drag-racing/80855-video-first-auto-x-2008-a.html
Posted By	For	Type	Date
8th Generation Honda Civic Forum	This thread	Refback	02-29-2008 01:01 AM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chicago Auto Show 2008 Pictures (56k no way)	CraigSi4	Introduction & Pictures	3	02-18-2008 06:14 PM
2008 Chicago Auto Show	SRT4toCivicSi	Water Cooler	6	02-17-2008 12:27 AM
2008 Chicago Auto Show Pictures	FusionSi11	Water Cooler	11	02-15-2008 06:08 PM
2008 Washington Auto Show	FIDO	Introduction & Pictures	2	02-05-2008 12:09 AM
2008 Accord video	HondaFamilyMan	Garage	5	07-11-2007 04:55 PM

03-04-2008, 04:35 AM	#24 (permalink)
00R101 Member Join Date: Jan 2006 Age: 52 Posts: 75 iTrader: 0 / 0%	Try looking ahead before you exit corners. Seems like you do a good job on before corner entry but once in the corner your head doesn't turn to look for the next one until after you exit. Kinda like you are getting a little G lock. Otherwise looked good expecially on the crappy OEM tires.

03-04-2008, 04:40 PM	#25 (permalink)
Blktrax Senior Member Join Date: Dec 2007 Location: NC Age: 27 Posts: 228 Adam iTrader: 0 / 0%	Yea definitly gotta work on getting behind the turn point, but with only 2200 miles on the car and the first event since november, its a lil bit to get back in the groove.

04-02-2008, 12:33 AM	#26 (permalink)
07AsmFG2 Junior Member Join Date: Mar 2007 Posts: 28 iTrader: 0 / 0%	What did you use to hold the camera?

04-09-2008, 09:11 AM	#27 (permalink)
Ace23 Member Join Date: Apr 2008 Posts: 52 iTrader: 0 / 0%	Nice...less than a month for me to be able to hit up the 1st one of 08

04-09-2008, 05:23 PM	#28 (permalink)
Live by SI Member Join Date: Apr 2008 Location: Markham Posts: 99 Peter iTrader: 0 / 0%	After seeing that your mount is obviously up to the task. I just bought a Sony hard drive camcorder and any advice you can give on that $3 headrest mount would be appreciated. Pics if possible?

04-15-2008, 02:00 PM	#30 (permalink)
Blktrax Senior Member Join Date: Dec 2007 Location: NC Age: 27 Posts: 228 Adam iTrader: 0 / 0%	Here is the DIY I copied. DIY: Camera Mount

04-16-2008, 09:14 PM	#31 (permalink)
Blktrax Senior Member Join Date: Dec 2007 Location: NC Age: 27 Posts: 228 Adam iTrader: 0 / 0%	My Camera Mount:

05-05-2008, 09:28 PM	#34 (permalink)
Blktrax Senior Member Join Date: Dec 2007 Location: NC Age: 27 Posts: 228 Adam iTrader: 0 / 0%	End of april - Auto-X Video April2008 - CarDomain Video