DIY: Aftermarket radio Install in an EX - Page 15

TailDragger · 04-13-2009, 09:08 PM

Quote:

Originally Posted by calnight

i thought we only have to wired 2 wires from connector B to an aftermarket stereo?

The way I understand it is that all of the buttons on the steering wheel controls actual send some kind of code through 1 wire. The problem is that all the manufacturers have there own code for each of the buttons. The PAC SWI converts the code to work with your after market unit, whatever it may be.

I tried to hook up my Eclipse HU directly to the factory steering wheel controls and pressing up volume would change inputs and channel down would turn up the volume. That kind of thing.

TailDragger · 04-13-2009, 09:15 PM

Also you could call or email product support of your after-market HU and see if they can help you out. What HU do you have?

calnight · 04-13-2009, 10:47 PM

I am sorry . what's HU stand for?

calnight · 04-13-2009, 10:52 PM

is it easy to install the PAC SWI-PS? Thanks

fogger · 04-14-2009, 02:15 PM

well I got the factory faceplate installed, and wouldn't you know it, it's too light in color too! So apparently honda either has crappy control of the painting process, or the cars with NAV have a slightly different interior panel color. I don't get it; one would expect all of the cars in the same model with the same interior color (Gray) to have the exact same plastic color on the dash. This is Totally Weak. Now I might have to dig deeper and order the Gage panel cover to try and get a color match, because it is just completely annoying to see the different colors where the two parts meet.

Any ideas as to WTH is going on here?

-Chris

booyadan16 · 04-14-2009, 02:45 PM

I've got a question. Will this fit in that new center panel? What kind of trim pieces will I need? to go around it? thanks

Amazon.com: Kenwood DNX5120 6.1-Inch-Wide Double-DIN In-Dash Navigation with USB/iPod Direct Control/DVD Receiver: Electronics

TailDragger · 04-15-2009, 11:08 PM

Quote:

Originally Posted by calnight

I am sorry . what's HU stand for?

Head Unit

Quote:

Originally Posted by calnight

is it easy to install the PAC SWI-PS? Thanks

Depends on your skills. I'd say if you can install a radio, no sweat.

Quote:

Originally Posted by booyadan16

I've got a question. Will this fit in that new center panel? What kind of trim pieces will I need? to go around it? thanks

Yes. You'll need to buy the Navi dash kit and brackets from the Navi Model Honda. Pretty sure the part numbers are in the beginning of this thread somewhere.

Amazon.com: Kenwood DNX5120 6.1-Inch-Wide Double-DIN In-Dash Navigation with USB/iPod Direct Control/DVD Receiver: Electronics

lonely1126 · 04-24-2009, 04:32 PM

nice walkthrough ill be using on my gfs car eventually.. need $$ !

thanickel · 04-25-2009, 03:58 AM

If any of you want to sell your Premium OEM head Unit and if it is NOT Clarion, I will take it. Please email to thanickel at hotmail dot com

Albikes · 05-02-2009, 10:42 PM

And the part numbers. I'm starting an install for an '09 Si Sedan. You post helped a lot.

Alberto

thanickel · 05-06-2009, 06:19 AM

Should I be connecting speaker level output from my Pioneer to the harness or the pre-out?

thanickel · 05-06-2009, 06:22 AM

Quote:

Originally Posted by thanickel

Should I be connecting speaker level output from my Pioneer to the harness or the pre-out?

I have a 2007 EX Coupe No Navi

joon joon · 05-06-2009, 10:32 AM

im pretty sure ex's have the oem sub... if so then ur gonna have to do the whiterice integration harness and use the pre-outs... if u dont have the oem sub then just connect the everything from the hu harness to the adaptor harness..

Maxw · 06-15-2009, 04:02 AM

Can you please post a picture of where the clips are that you need to pry. Tonight I just tried to get my head unit out but I couldnt figure out which ones to pry first so please help me out. Thanks

joon joon · 06-15-2009, 10:09 AM

there are no real clips to "pry" out... in a way u are popping them out... start from the cluster panel then move ur way to the headunit panel... the cluster panel should come out as one and the headunit panel as another...

firebirdude · 06-24-2009, 05:06 PM

Is anything different for an 09 LX? Metra 701722 and 40HD10 will still work?

joon joon · 06-24-2009, 06:12 PM

Wats the 40hd10?? But the metra harness will work

JChristFanatic · 07-09-2009, 06:54 PM

can you use the old mounting brakets for the new part?, i have a double din 7" touch screen i want to put it... you might have answered this but where do i get plug in to wire up my unit?

firebirdude · 07-09-2009, 07:05 PM

Quote:

Originally Posted by joon joon

Wats the 40hd10?? But the metra harness will work

The antenna adapter.

joon joon · 07-09-2009, 08:46 PM

u need a dash kit to put a headunit in.. and firebirdude the adaptor will work...

05-02-2009, 10:42 PM	#290 (permalink)
Albikes Junior Member Join Date: Apr 2009 Location: NorCal Posts: 5 Albert iTrader: 0 / 0%	Thanks for the DIY... And the part numbers. I'm starting an install for an '09 Si Sedan. You post helped a lot. Alberto

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://www.8thcivic.com/forums/audio/37564-diy-aftermarket-radio-install-ex.html
Posted By	For	Type	Date
DIY: Aftermarket radio Install in an EX - 8th Generation Honda Civic Forum	This thread	Refback	03-01-2008 10:46 AM
New Car! 08 Civic LX 2door. Pics! - Page 2 - Car Audio Forum - CarAudio.com	This thread	Refback	02-17-2008 10:29 PM
New Car! 08 Civic LX 2door. Pics! - Page 2 - Car Audio Forum - CarAudio.com	This thread	Refback	02-17-2008 11:04 AM
New Car! 08 Civic LX 2door. Pics! - Page 2 - Car Audio Forum - CarAudio.com	This thread	Refback	02-16-2008 11:27 PM
New Car! 08 Civic LX 2door. Pics! - Page 2 - Car Audio Forum - CarAudio.com	This thread	Refback	02-16-2008 09:38 PM
New Car! 08 Civic LX 2door. Pics! - Page 2 - Car Audio Forum - CarAudio.com	This thread	Refback	02-16-2008 09:38 PM
New Car! 08 Civic LX 2door. Pics! - Page 2 - Car Audio Forum - CarAudio.com	This thread	Refback	02-16-2008 09:34 PM
Something Happened To My Car Guys. - The Forum	This thread	Refback	02-16-2008 12:45 PM
DIY cd changer installation? - GreenHybrid - Hybrid Cars	This thread	Refback	02-15-2008 05:28 PM
como quito el estereo del civic 2006? - www.NipponPower.com.mx	This thread	Refback	02-08-2008 02:37 PM
DIY: Aftermarket radio Install in an EX - Page 7 - 8th Generation Honda Civic Forum	This thread	Refback	02-06-2008 04:46 PM
DIY: Aftermarket radio Install in an EX - Page 8 - 8th Generation Honda Civic Forum	This thread	Refback	02-06-2008 04:42 PM
So im installing my avic d3 in my ex right now and i need some help - 8th Generation Honda Civic Forum	This thread	Refback	12-25-2007 01:23 AM
2007 Honda Civic Si Install - Page 2 - MP3Car.com	This thread	Refback	12-15-2007 07:48 PM
Audio - 8th Generation Honda Civic Forum	This thread	Refback	12-12-2007 01:12 AM
06 civic wiring colours - Ozhonda Forums	This thread	Refback	12-09-2007 11:53 PM
2006 civic In-Dash Installation Guide ?? - MP3Car.com	This thread	Refback	12-05-2007 03:10 PM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
install aftermarket radio on DX sedan	jamieZ	Civic Coupe And Sedan	12	01-17-2007 10:08 PM
to add an aftermarket radio to an 06 ex model	unplugged	I.C.E., Electrical, Security, & Navigation	14	05-02-2006 08:00 PM
aftermarket radio install?	thomasorallye	I.C.E., Electrical, Security, & Navigation	2	04-06-2006 06:02 PM

04-13-2009, 09:15 PM	#282 (permalink)
TailDragger Senior Member Join Date: Jun 2008 Location: Pebble Beach Posts: 196 Scott iTrader: 0 / 0%	Also you could call or email product support of your after-market HU and see if they can help you out. What HU do you have?

04-13-2009, 10:47 PM	#283 (permalink)
calnight Junior Member Join Date: Aug 2007 Posts: 25 iTrader: 0 / 0%	I am sorry . what's HU stand for?

04-13-2009, 10:52 PM	#284 (permalink)
calnight Junior Member Join Date: Aug 2007 Posts: 25 iTrader: 0 / 0%	is it easy to install the PAC SWI-PS? Thanks

04-14-2009, 02:15 PM	#285 (permalink)
fogger Junior Member Join Date: Apr 2008 Posts: 19 iTrader: 0 / 0%	well I got the factory faceplate installed, and wouldn't you know it, it's too light in color too! So apparently honda either has crappy control of the painting process, or the cars with NAV have a slightly different interior panel color. I don't get it; one would expect all of the cars in the same model with the same interior color (Gray) to have the exact same plastic color on the dash. This is Totally Weak. Now I might have to dig deeper and order the Gage panel cover to try and get a color match, because it is just completely annoying to see the different colors where the two parts meet. Any ideas as to WTH is going on here? -Chris

04-14-2009, 02:45 PM	#286 (permalink)
booyadan16 Senior Member Join Date: Mar 2009 Location: Chico CA Posts: 285 Dan iTrader: 0 / 0%	I've got a question. Will this fit in that new center panel? What kind of trim pieces will I need? to go around it? thanks Amazon.com: Kenwood DNX5120 6.1-Inch-Wide Double-DIN In-Dash Navigation with USB/iPod Direct Control/DVD Receiver: Electronics

04-24-2009, 04:32 PM	#288 (permalink)
lonely1126 Senior Member Join Date: Jan 2009 Posts: 110 iTrader: 2 / 100%	nice walkthrough ill be using on my gfs car eventually.. need $$ !

04-25-2009, 03:58 AM	#289 (permalink)
thanickel Junior Member Join Date: Feb 2008 Posts: 10 iTrader: 0 / 0%	If any of you want to sell your Premium OEM head Unit and if it is NOT Clarion, I will take it. Please email to thanickel at hotmail dot com

05-06-2009, 06:19 AM	#291 (permalink)
thanickel Junior Member Join Date: Feb 2008 Posts: 10 iTrader: 0 / 0%	Should I be connecting speaker level output from my Pioneer to the harness or the pre-out?

05-06-2009, 10:32 AM	#293 (permalink)
joon joon Senior Member Join Date: Mar 2008 Posts: 2,001 iTrader: 30 / 100%	im pretty sure ex's have the oem sub... if so then ur gonna have to do the whiterice integration harness and use the pre-outs... if u dont have the oem sub then just connect the everything from the hu harness to the adaptor harness..

06-15-2009, 04:02 AM	#294 (permalink)
Maxw Member Join Date: Jun 2009 Location: Southern California Posts: 45 Max W iTrader: 1 / 100%	Can you please post a picture of where the clips are that you need to pry. Tonight I just tried to get my head unit out but I couldnt figure out which ones to pry first so please help me out. Thanks

06-15-2009, 10:09 AM	#295 (permalink)
joon joon Senior Member Join Date: Mar 2008 Posts: 2,001 iTrader: 30 / 100%	there are no real clips to "pry" out... in a way u are popping them out... start from the cluster panel then move ur way to the headunit panel... the cluster panel should come out as one and the headunit panel as another...

06-24-2009, 05:06 PM	#296 (permalink)
firebirdude Junior Member Join Date: Jun 2009 Posts: 16 iTrader: 0 / 0%	Is anything different for an 09 LX? Metra 701722 and 40HD10 will still work?

06-24-2009, 06:12 PM	#297 (permalink)
joon joon Senior Member Join Date: Mar 2008 Posts: 2,001 iTrader: 30 / 100%	Wats the 40hd10?? But the metra harness will work

07-09-2009, 06:54 PM	#298 (permalink)
JChristFanatic Junior Member Join Date: Apr 2009 Location: Greenville Posts: 1 JT Turbeville iTrader: 0 / 0%	can you use the old mounting brakets for the new part?, i have a double din 7" touch screen i want to put it... you might have answered this but where do i get plug in to wire up my unit?

07-09-2009, 08:46 PM	#300 (permalink)
joon joon Senior Member Join Date: Mar 2008 Posts: 2,001 iTrader: 30 / 100%	u need a dash kit to put a headunit in.. and firebirdude the adaptor will work...