Quote:
|
Originally Posted by projekt1
u remove it from under the thottle body but have a rag or something ready cause the coolant is going to come out of it and quite a bit of it. all the hoses that are on that one piece (the like double metal one) will be removed and replaced
|
Like he said, you have to remove that coolant line, but becareful. It may be hot and quite a bit may flow out. Also, it's fairly tight, so be sure it doesn't splash anywhere in your face. Wear glasses/visors if you have it. You need to replace it with one of the tubes that came with the kit.
Have the replacement tube nearby, because it'll be dripping loads of coolant otherwise.
Obviously the lower square points to underneath the throttle bottle, like the picture you attached before. The upper square is where the tube should be connected to.