Quote:
|
Originally Posted by Highrev1
Easy fix...Use four one on each side and bolt it to the additional hole in that bracket, easily reinforce the mounting location removing the stress from the outer edge and transferring it. Gimme a week or 2 I will make em.
 |
Looks like this is quite an easy bolt-on fix. I'd buy a set. Thanks!
Quote:
|
Originally Posted by Highrev1
This design would requiring drilling another hole in that bracket but would add some extra strength. Just a thought. These would be easy to install drill a hole and bolt them on, and would solve the tear out issue.
 |
I don't know about drilling another hole in that bracket. Putting another hole in the bracket would weaken it even more.
Don't know why that other hole is there in the first place. Maybe it was the extra effort Honda went through to reduce weight on the car? Yeah right.
