8th Generation Honda Civic Forum - View Single Post

amdhunter · 05-23-2006, 07:12 PM

Disabling Door Lock Modes, both Automatic and Manual

1) Open the drivers door. [On Vehicles with automatic transmission, make sure the shift lever is in PARK (P).]
2) Turn the ignition switch to the ON [II] position.
3) Set the parking brake.
4) Push and hold the front of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds.

Disabling Door Unlock Modes, both Automatic and Manual

1) Open the drivers door. [On Vehicles with automatic transmission, make sure the shift lever is in PARK (P).]
2) Turn the ignition switch to the ON [II] position.
3) Set the parking brake.
4) Push and hold the rear of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound.
5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds.

* All settings of the Door Locks will retain setting even if the battery is disconnected.

05-23-2006, 07:12 PM	#3 (permalink)
amdhunter Senior Member Join Date: Feb 2006 Age: 33 Posts: 228 iTrader: 0 / 0%	Disabling Door Lock Modes, both Automatic and Manual 1) Open the drivers door. [On Vehicles with automatic transmission, make sure the shift lever is in PARK (P).] 2) Turn the ignition switch to the ON [II] position. 3) Set the parking brake. 4) Push and hold the front of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound. 5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds. Disabling Door Unlock Modes, both Automatic and Manual 1) Open the drivers door. [On Vehicles with automatic transmission, make sure the shift lever is in PARK (P).] 2) Turn the ignition switch to the ON [II] position. 3) Set the parking brake. 4) Push and hold the rear of the master door lock switch on the driver's door. You will hear a clicking sound, and after about 5 seconds, you will hear another clicking sound. 5) Release the switch, and turn the ignition switch to the LOCK (0) position within 5 seconds. * All settings of the Door Locks will retain setting even if the battery is disconnected. Last edited by amdhunter; 05-23-2006 at 08:07 PM.