Quote:
|
Originally Posted by asndragonboii
So the only thing bad about the new one is that it is hard to get the clips to clip?
|
Yah, that's the only thing that doesn't appear to fit very well in the kit. The actual bulb is also fairly hard to screw into the headlight area like mentioned on page 1. Not sure what the story was but the drivers side took us about an hour of effort on and off to finally get it to go, the passenger side went right in in less than 30 seconds. The only other problem is the flicker on the passenger side but to tell you the truth I kind of hurried through that side because it was dark, I was starting to feel the effects of the whisky cokes I had been sipping while working, and just wanted to get it done. I rechecked all my connections about 5 times on the drivers side while troubleshooting my problem and everything went together so quickly on the passenger side that I didn't double check everything. The end result is fantastic though! 6000K was definitely the right color for me, I wanted it to be blatantly HID but not blue or purple enough to look like an aftermarket HID kit or lose a lot of light output versus the 4300K kits. I also strongly suggest anybody that is going to take this project on buy about 5-10 of those plastic clips that hold the wheel well liner on since I broke 4 or 5 of them during my install. I tried to baby them on the first wheel and not break them but it's not worth your effort. Just pry and tear them out and put new ones in on whatever ones didn't come out cleanly. Only about $1.10 at the local Honda dealer.