Quote:
|
Originally Posted by Liu
Hey, cool, you're in Minnesota.
Anyway, I don't know about your kit, but my kit just had 2 prongs that went into the spot where the old bulb plugs into for power. I really couldn't tell which went into which hole, but hey, 50/50 chance anyway. If yours is like mine, your wires might be backwards and are just getting no electricity to the ballast.
BTW, if this doesn't work, then your ballast/bulb might be dead. Install the other set on the other side and tell us what happens if this is the case.
|
Yah, same as mine but I wouldn't have thought it would have allowed me to install it backwards, but I will verify that. The male plug that connects into the factory headlight connection had a tab on one side of it that I would have thought would have prevented it from going in backwards. It's all pretty tight in there as you all probably know so once you get the plugs close you're just kind of blindly mashing them together. Thanks for the input. I'll give it a shot after work today. BTW, want to drive to Duluth and help me out? :) Liu, did you have the same kit that is shown on page 1 of this thread?