Ok, here's what I have....look at your pic for the fog light switch and purple wire...mines exactly the same
Now, Here's My relay...mind you these are messy as I'm not done yet and I hooked them back up to stock after cutting them. Also pay no attention to the blue wire with the scrap tape on it. That was my second cut because I thought I might have been wrong at first. My relay is upside down from your pic so I'm using the two wires on the bottom. You can see the connectors in place
Originally I had the purple wire which comes from my switch (I kept the same color when I spliced) to the blue on the relay...now you see the loop in it because it went back to original
The white/red I have going into the parking lamp wire red/black.....I knew this already from my courtesy light install and that's where I ran that..
It looks like a mess and it isn't hard to screw up but I did
