Quote:
|
Originally Posted by Moisted
I noticed the same thing, the frame when flipped fits perfectly in the grill if you drop it one notch lower. But the problem is the screw holes (on the grill and the frame) now won't align; the frame is a little lower.
I still haven't come up with a way to overcome that problem, do you have a picture of how you used that part from Homedepot?
|
I dont have any pictures, but i can describe it.
I just hooked the crown bolts onto the back of the grill and used long screws.
No cutting, no modifying. I used the factory holes in the license plate frame. If the heads on the screws arnt big enough, just throw some small washers on there.
You can probably also use washers instead of crown bolts, but they would be a pain to get on there.