Quote:
|
Originally Posted by sk33ny
Just did this on my sedan and it worked well.
But instead of cutting up the frame, when i flipped the mount upside down i noticed it would fit perfectly in the grill. But the holes where offset slightly.
So i thought about using some nuts, washers and long screws.
So i looked around and eventually found some Crown Bolt wall mounts.
( http://www.homedepot.com/prel80/HDUS...4+4078&pos=n20)
They worked perfectly. I think if you put a little Loctite on there it wont go any where. |
Well i just found out the hard way that you cant edit your posts, so sorry for the double post. After posting, i noticed the link doesnt work. So i found a link that does. (note: These arnt the exact bolts i used, there just a example)
http://www.homedepot.com/prel80/HDUS...=12-23334346-2