8th Generation Honda Civic Forum - View Single Post

severthee · 02-21-2010, 01:10 PM

Hi, Im gona try to attemp to DIY this tomorrow. Ive tried to take out the center console before and i didnt see any aux wire waiting there. So i guess ive to check whats behind the head unit. reading some of the posts above, all i need is locate the 20pin terminal. short 5 and 15 from aux detection and then wire the audio signal to 3 , 13 and 14.
im from the philippines and i might encounter the same problem as the guy above so i looked around the forum and saw this...

DIY: Aftermarket radio Install in an EX
on his post, he showed the 20pin connector but a different pin assignment.
#1 / Radio marking as TELMG No wire (EX w/nav?)
#2 / Radio marking as TELM- No wire (EX w/nav?)
#3 / Radio marking as HFT-11No wire (EX w/nav?)
#4 / Radio marking as REMC Pink (not used)
#5 / Radio marking as REMG Brown with silver stripe (not used)
#6 / Radio marking as AUXG Blue with silver stripe (not used)
#7 / Radio marking as AUXSH Flat black (not used)
#8 / Radio marking as AUXSG Brown with silver stripe (not used)
#9 / Radio marking as NAVSH No wire (EX w/nav?)
#10 / Radio marking as NAVG No wire (EX w/nav?)
#11 / Radio marking as HFT No wire (EX w/nav?)
#12 / Radio marking as TEL+ No wire (EX w/nav?)
#13 / Radio marking as HFT-12 No wire (EX w/nav?)
#14 / Radio marking as PASM No wire (EX w/nav?)
#15 / Factory AMP Power control wire Lt.Blue with silver stripe
#16 / Radio marking as AUXD White with silver stripe (not used)
#17 / Radio marking as AUXR Green (not used)
#18 / Radio marking as AUXL Yellow with silver stripe (not used)
#19 / Radio marking as NAVR No wire (EX w/nav?)
#20 / Radio marking as NAVL No wire (EX w/nav?)
(credit to the original poster)

im gona assume that if i were to follow that pin assignment id have to do the following:
-short 16 and 6 for aux detect
-wire left channel to 18
-wire right channel to 17
-use 8 as the audio ground
-use 7 as a shielding

please let me know if i overlooked something.
also, is there an easy way to take out that head unit? or i really have to go through all that panel removal?

thanks

02-21-2010, 01:10 PM	#118 (permalink)
severthee Junior Member Join Date: Feb 2010 Posts: 2	Hi, Im gona try to attemp to DIY this tomorrow. Ive tried to take out the center console before and i didnt see any aux wire waiting there. So i guess ive to check whats behind the head unit. reading some of the posts above, all i need is locate the 20pin terminal. short 5 and 15 from aux detection and then wire the audio signal to 3 , 13 and 14. im from the philippines and i might encounter the same problem as the guy above so i looked around the forum and saw this... DIY: Aftermarket radio Install in an EX on his post, he showed the 20pin connector but a different pin assignment. #1 / Radio marking as TELMG No wire (EX w/nav?) #2 / Radio marking as TELM- No wire (EX w/nav?) #3 / Radio marking as HFT-11No wire (EX w/nav?) #4 / Radio marking as REMC Pink (not used) #5 / Radio marking as REMG Brown with silver stripe (not used) #6 / Radio marking as AUXG Blue with silver stripe (not used) #7 / Radio marking as AUXSH Flat black (not used) #8 / Radio marking as AUXSG Brown with silver stripe (not used) #9 / Radio marking as NAVSH No wire (EX w/nav?) #10 / Radio marking as NAVG No wire (EX w/nav?) #11 / Radio marking as HFT No wire (EX w/nav?) #12 / Radio marking as TEL+ No wire (EX w/nav?) #13 / Radio marking as HFT-12 No wire (EX w/nav?) #14 / Radio marking as PASM No wire (EX w/nav?) #15 / Factory AMP Power control wire Lt.Blue with silver stripe #16 / Radio marking as AUXD White with silver stripe (not used) #17 / Radio marking as AUXR Green (not used) #18 / Radio marking as AUXL Yellow with silver stripe (not used) #19 / Radio marking as NAVR No wire (EX w/nav?) #20 / Radio marking as NAVL No wire (EX w/nav?) (credit to the original poster) im gona assume that if i were to follow that pin assignment id have to do the following: -short 16 and 6 for aux detect -wire left channel to 18 -wire right channel to 17 -use 8 as the audio ground -use 7 as a shielding please let me know if i overlooked something. also, is there an easy way to take out that head unit? or i really have to go through all that panel removal? thanks