Quote:
|
Originally Posted by TampaSi07
Just to reiterate; the Scangauge uses the car's OBDII to get it's readings. It plugs right into the OBD port. Honda builds in an intake temperature sensor. It is already there on all Si's. All the SGII allows you to do is see this information that the car is using from that sensor. If it were a heat soak issue as you suggested then all the intakes should show a similar temp, but they are drastically different. Also, if it were a soak issue it would mean Honda's sensor was useless.
From the Honda Si press release:
|
That explains it. Honda's temp sensor is useless.
Thanks for clearing that up!
