[av911]

Originally Posted by ethlar

pull out both of the light fixtures
on the dome light it has two wires, one of them is pink, the other is blue or black, i cant remember which.

use a unbent coat hanger or something similar, i found starting from the map light hole and going back to the dome light is easiest, attach a wire to the coat hanger and pull it back through, i ended up using 18 gauge stranded wire

on the map light connector it has 3 pins but only one of them actually has a wire in it, its going to be on one of the sides depending on the orientation you are holding it in, take one end of the wire you just put in, strip it and bend the end in half. Shove it in the oposite side hole from the existing wire. secure the wire with tape.

use your method of choice to splice into the pink wire on the dome light on the other end, i just pushed the stranded wire into the connector and taped it into place.

partially reinstall the map lights and put in the screw that grounds the fixture and open a door and make sure that the lights turn on, if they work finish reinstalling everything and enjoy.

Thanks, man!!!

Took me awhile to complete it, but finally got it. The only gripe about this is you can't turn the map lights on/off when needed. Other than that, pretty happy with it.

Thanks again!!