So i was looking at front plate relocators... PWJDM wants $60, thats ridiculous
run down to home depot, they sell strips of sheet metal for $1.98 pick yourself up one of those, and 2 bolts
if you don't know what nuts n bolts are... Don't keep reading lol
cut the sheet in half and bend it... i put it on the floor, put my foot on half of it, and lift the other half
bolt the plate to the metal
and bolt use 2 short screws put it on ur bumper
some snow slid off my car and bent the plate down, so maybe get some stronger steel and stronger plates.. id didnt rip off but bent
how it looks
how it should
Quote:
Originally Posted by SiAzul
If you want to keep the same look, just look for support brackets they sell at lowes/home depot, they are like an L and are about 1/8" thick, I would think they will hold up better. They have them in all sorts of sizes
|