Quote:
|
Originally Posted by lostdaytomorrow
Use a self tapping screw on a piece of the metal near your amp. Sand off the area where the washer or ring terminal will be. Screw down the ring terminal onto the bare shiny metal. Say hello to your new ground with low resistance.
|
do exactly as he said. I found the best place is behind the carpeting on the pic I had posted *sorry no actual pic of the ground itself*, but behind that carpeting, there is a bare piece of metal perfect for that.
it took a little bit to get the self tapper to go in, but it worked out great, and it's completly hidden out of sight.