[Dr Eng X]

This is my first post though I hope I could contribute instead of asking questions however I believe the following questions would help others too.
Thanks in advance

Originally Posted by peliROJO

A male crimp connector.


The two wires to tap are the (+) Positive, Blue/Grey, and the (-) Negative Pink/Grey located in the Blue harness mounted underneath the main fuse box. The Blue T-Tap shown is to my aftermarket amp, please disregard. It's connected to a Purple/Grey wire and only comes on if the car is in the ON position. (See post #9 - Si uses the Light Blue wires)

Thanks. I and others need some help:
1st question: I am still confused on the wires and connections to fuse box. I included the pictures that confused me. One arrow is pointing to a white wire and says Tap pink/grey. Can someone please post two clear pictures?
2nd Can we test wiring before installing? That's connect the led to those wires then connect the switch and led?
3rd question: Can this work as on/off/Auto? The same way the dome light works. That's I Can keep it on whenever I want as in on for dome light?
In 3rd question case what would be the switch?
I am refering to this post

Originally Posted by joey.walla

So today, I decided I was going to rehook them up. I uninstalled everything and put everything back to stock. Unfortunately, my dome lights will not come on, front or rear. I checked the interior light fuses, good, checked the blue connector, good.

Idk what's going on.



CLIFFNOTES

Question 1) How do I get my lights working as stock?

Question 2) After 1 is solved, how do I have my courtesy lights stay on all the time?

(If you need more information/pictures, let me know)

Thanks,

Joey

Courtesy Light Install Help