|
Drilling out a rivet is easy..If you want some practice..go buy a "hotwheel" open it and drill out the rivet and take the whole body off. Its that simple..just find a drill bit that fits the smaller part on the INSIDE of the larger round metel peice..drill that a bit and the LARGER part will fall right off..then slid the rivet up.or down..either way...up should be easier..but this is easy..and like I said if your scared get a HOTWHEEL for a buck and practice lol..I let my son do this at 6 years old..this method of practice..so if he can do it.so can anyone
|