8th Generation Honda Civic Forum - View Single Post - CLAYBAR TUTORIAL! *Q&A* *VIDEO*
View Single Post
Old 03-30-2007, 09:37 PM   #1 (permalink)
si_civic
Senior Member
 
si_civic's Avatar
 
Join Date: Jul 2006
Location: B.C. ,Canada
Age: 34
Posts: 4,612
A/Cst.D.F.Abate
Exclamation CLAYBAR TUTORIAL! *Q&A* *VIDEO*

DISCLAIMER: I do not accept liability, nor shall www.8thcivic.com, for any damages that may occur while claybarring your car. I cannot control what brand or claybar you use, what environment you are in, nor how you actually use the claybar system itself. Thus, use this video as a guideline only

Finally I found time to do up a tutorial on how to prep a car's surface before claybarring, how to claybar properly, and tips afterwards.

This tutorial is featured on a customer's brand new 505hp:SHOCKED: 2007 Chevrolet Corvette Z06 Coupe. His main complaint was little white overspray nibs found all over the car. I spent a total of 6.0 hours on the beast.




INTRODUCTION TO CLAYBARS (FAQ may be updated at anytime)


Image shows surface contamination which is difficult to clean or polish off, yet auto claybar removes it with ease.


Q What is a claybar?
A A claybar is a synthetic piece of clay (some products are not synthetic, however) that is intended to remove contaminents and overspray that simple washing cannot. It is a vital step to provide the best finish and the results can be simply amazing.

Quote:
Detailing clay works by hydroplaning (floating) over the surface you’re cleaning on a thin layer of clay lubricant. When the clay (polish) encounters surface contamination, it abrasively grinds it away. Detailing clay shears off any foreign material above the level surface of the paint. -Carcare.com
Q Why should I use one?
A Well, because I said so. If you're fussy like me, you want your investment to look like a million dollars, even after a few years. Claybar'n your car is the first step to provide the best possible finish. It is also necessary to claybar your car if you do NOT want swirls, spiderwebs, or scratches. Remember, if you wax your car without claybarring, you run the risk of having an ugly finish, and eventually having mad swirrels (as opposed to happy swirls). You also run the risk of rubbing in the dirt and grime into paint while waxing (or polishing) if you do not claybar. Remember, washing only removes the basic dirt and contaminents, no matter how much soap you use.

Q WHEN should I use one?
A Do the touch test. After washing/drying your baby, run your fingers along the freshly washed surface. Do you feel grit? Does it feel rough? Do you like it rough? I don't think so. If it is NOT feeling glass-smooth, it's time to do a claybar treatment!

Q Why should I trust you?
I have 15+ years of autodetailing experience, and I tried
almost every product out there. I get to do these cars because my company trusts me. There is four other detailers in our shop, and they won't come close to these $100,000+ cars. Ever. I'm not bragging, I'm just that good.

Q Can I eat the claybar?
A It's not a chocolate bar, so NO. lol

Q Can I use claybar on any surface other than paint?
A Claybars isn't just for paint. You can use detailing clay on any smooth, hard surface, including glass and chrome. Do not use clay on clear plastic, such as headlight lenses. The dirty clay will not harm glass, and it's amazing how much dirt film clay can remove from your exterior glass. It can also be used on rims with accumulated brake dust. Claybasr are not recommended on wheels that do not have a factory clearcoat or powder coat finish. Check to see what your rims are before you do them

added
Quote:
Originally Posted by Coop
how big of a section can you do with what size of clay bar?
A I can usually do one section at a time with the size I show in the video. Visually check the claybar often to see if there is a lot of contaminants. It can vary. If there is a lot of buildup on the claybar, then form a new one. Don't be alarmed if there is a little buildup, the bar is just doing it's job.

Quote from Carcare.com
Quote:
CAR DETAILING CLAY SUMMARY
Don't overuse a detailing clay bar. It is often over-prescribed as a cure-all. Once or twice a year is adequate for most well-detailed cars. Be sure to use a proper lubricant.

Choose a pre-wax car polish with the least amount of cleaning and polishing capability necessary to get the job done without being harsh on your paint. The goal is to maintain your paint in excellent condition, not wear it out by over-polishing.


PROS
- It's easy to apply
- A necessary step to remove paint contaminents
- Provides the smoothest finish

CONS
- Expensive
- Can ruin your finish if done improperly (dirty claybar etc)
- Time consuming

VIDEO SUMMARY
Not only does the video demontrates basic claybarring techniques, I show how to prep your surface BEFORE washing and where to degrease the car. I provided how to properly CHAMOIS your car as well. What I didn't demonstrate is how to wash properly. I didn't have time. I also didn't show how to apply wax afterwards (VERY IMPORTANT STEP AFTER CLAY BARRING) nor show how to remove. I may down the road.

CLICK THE LINK TO WATCH!
http://s105.photobucket.com/albums/m...t=cdba7006.flv

Last edited by si_civic; 03-30-2007 at 10:32 PM.
si_civic is offline  
Reply With Quote