Quote:
|
Originally Posted by drexp2000
Well did you have them clear it? If you cleared it and if it doesn't come back on, you're OK at this time...
According to the Service Manual, that MAF Sensor code is a DTC P0102. I can't find a code with Fuel Metering problem... There's a whole procedure on troubleshooting this problem out... But the basics include: Check for poor connections or loose terminals at the MAF sensor and the ECM. Maybe even take out the MAF sensor and make sure the little probe on it is not soaked in the oil or dirty from the air filter (it could happen..)
|
They cleared it and came back on afterwards =p
Ok thanks for your help!
I'll try to figure out everything from here
