8th Generation Honda Civic Forum - View Single Post

bluenoser1968 · 06-05-2009, 08:38 AM

This worked well for me. I followed someone elses suggestion of using "paper clips". I just cut the paper clip wire to length (about 1 inch), made a small loop at one end. Then took an old set of head phones cut the male 3.5mm jack and wire off and sodered the wires to the paper clip pins. (one left, one right and one ground) I made a U shape with another piece of paper clip and used it to jumper 5 and 6. Plugged them all in to the white jack as explained about the paper clips fit nice and snug. Then I used electrical tape to isolate and seal everything up.

It has taken me long to type this respone then it took me to do the wiring. Great information thanks to everyone.

06-05-2009, 08:38 AM	#103 (permalink)
bluenoser1968 Junior Member Join Date: Jun 2009 Posts: 3	This worked well for me. I followed someone elses suggestion of using "paper clips". I just cut the paper clip wire to length (about 1 inch), made a small loop at one end. Then took an old set of head phones cut the male 3.5mm jack and wire off and sodered the wires to the paper clip pins. (one left, one right and one ground) I made a U shape with another piece of paper clip and used it to jumper 5 and 6. Plugged them all in to the white jack as explained about the paper clips fit nice and snug. Then I used electrical tape to isolate and seal everything up. It has taken me long to type this respone then it took me to do the wiring. Great information thanks to everyone.