There's one clip and one screw at the door handle location. In the end, you don't have to remove the door handle from the cables that are attached to it. Once you have the door panel off the door itself, you can slip the door handle through its opening with the cables still attached.
Next,
-1 Pry up on the rear edge of the switch panel to release the rear clip using the appropriate trim tool.
-2 Pull out along the edge of the panel to release all of the hooks (B).
-3 Pull the switch panel rearward to release the front hook (C).
-4 Disconnect the power mirror switch connector (D) (driver's) and the power window switch connector (E).
Next, remove the screw (below).
