8th Generation Honda Civic Forum - View Single Post

ohiocivicracer · 02-22-2007, 04:02 PM

4) Using the FACTORY Amp in a EX/SI For Carpc Speaker outputs!!! (works really well)

OK, so when i started planning this project, my orignal thought was to buy a new AMP for all my highers and regular stock speakers... well NO NEED! i think that the factory EX/SI sound is good enough so thanks to the wiring diagrams i was able to tap into my amp...

STEP 1
You need a 5.1 Sound Card in your PC for everything to sound good :-)

STEP 2
The connects that we will be using are the 1/8 speaker wire (the same plug as for an IPOD)

now what i did was i cut a MALE to MALE 1/8 in half, this way i have 4 channels, (each 1/8 has 2 right/left) These two cords will now supply all the sound for your stock speakers...

WILL FINISH IN A BIT, THE BOSS IS AROUND

02-22-2007, 04:02 PM	#3 (permalink)
ohiocivicracer Senior Member Join Date: Aug 2006 Location: Mentor, Ohio Age: 24 Posts: 1,833 Kevin	4) Using the FACTORY Amp in a EX/SI For Carpc Speaker outputs!!! (works really well) OK, so when i started planning this project, my orignal thought was to buy a new AMP for all my highers and regular stock speakers... well NO NEED! i think that the factory EX/SI sound is good enough so thanks to the wiring diagrams i was able to tap into my amp... STEP 1 You need a 5.1 Sound Card in your PC for everything to sound good :-) STEP 2 The connects that we will be using are the 1/8 speaker wire (the same plug as for an IPOD) now what i did was i cut a MALE to MALE 1/8 in half, this way i have 4 channels, (each 1/8 has 2 right/left) These two cords will now supply all the sound for your stock speakers... WILL FINISH IN A BIT, THE BOSS IS AROUND Last edited by ohiocivicracer; 03-01-2007 at 04:30 PM.