Quote:
|
Originally Posted by kicker_jace
when u tried the sensors in different spots was it inside the tube? or its mounted outside?
|
it was mounted the same way as it would be on the factory air box. The sensor is one directional..meaning if you rotated it 180 degrees, it wouldn't read air flow. If you remove it from your vehicle.. you'll see an opening on one side with resisters. So I know the installation of the sensor was right. I also had dremeled out where the sensor screws into.. and placed in on the piping in sveral spots to keep everything the same basically.
Its funny how other systems are working when in theory, my setup is no different excep the length of pipe.