8th Generation Honda Civic Forum - View Single Post

gbae007 · 02-06-2007, 11:27 PM

Might try and see if the installation was perfect. Make sure things are fitting tight and the clamps are fully twisted in.

If you find someone with a Scangauge II that will read and reset OBII error codes.

02-06-2007, 11:27 PM	#2 (permalink)
gbae007 Senior Member Join Date: Jun 2006 Location: Portland, Oregon Age: 30 Posts: 878	Might try and see if the installation was perfect. Make sure things are fitting tight and the clamps are fully twisted in. If you find someone with a Scangauge II that will read and reset OBII error codes.