|
Ok so now I have a few questions for the experienced guys in here.
I have been running G Stock class and I am more than likely going to continue because the Si is a very well set up car for stock class and can be competitive. One of my areas that I am working on is breaking coming into corners. I was starting a little to early mostly because I was not breaking hard enough.
I was able to get 10 fun runs in at the last event (yesterday) and worked on this quite a bit along with my lines. I know that I can change my pads and still remain stock class, what is a good recommended pad? My car is 95% used for auto cross so noise is not of that much concern.
Also if any of you guys are running stock class with stock tires, I have the Pilot MX that came on the car, what pressures are you running at that you have found works well? I used a 37 psi front and a 34 PSI rear yesterday that worked well for me.
Let me know what you guys think. Thanks
|