View Single Post
Old 01-15-2007, 02:41 PM   #10 (permalink)
NIGHTHAWKSI
Senior Member
 
NIGHTHAWKSI's Avatar
 
Join Date: Nov 2006
Location: long island
Age: 22
Posts: 13,689
Ian
iTrader: 13 / 100%
as long as you have the right tools and some common sense it should go very easy. make sure to take out all the screws holding the lense to the housing and bake in the oven at 230 for ~8 minutes. the lense and housing should peel apart easy as soon as you break the seal with a screwdriver and a putty knife.i find that around the amber corner there is a good area to stick the screwdriver between the lense and the black case until it wont go in any further and slowly pry the two peices apart from there. i did mine in about 2 hours including bumper removal and installation. if it is your first time with taking off the bumper/headlights i would give yourself an entire saturday, just incase it takes longer, you dont want to rush. the worst part is putting your headlights in the oven.....be very careful to watch them so that they do not melt!
NIGHTHAWKSI is offline   Reply With Quote