Quote:
Originally Posted by Carbonyl
its not that hard, it just seems scary because you're cutting into your headlight. All you have to do is cut the hole slowly until it fits the way you like it. Retrofitting for this car is a little harder than other cars cause you have to take into account the high beams as well, that's what I learned from my process. =\ Otherwise, heat gun or oven to take apart the head lights, dremel to cut the hold in the headlight housing. Jb weld and/or some screws to mount the projectors and shrouds and patience. Besides the D2S bulb and ballast which is the usual stuff.
Read up and good luck on the project.
|
Thanks man, I think i'm going to find someone local who has experience with this. Let me know if you're available
