8th Generation Honda Civic Forum - View Single Post

Sion0x · 01-12-2007, 06:48 PM

Tools needed: flat head screwdriver, socket wrench with extension and 10mm socket.

EASY mod, looks great.

1. Get your JDM engine cover japanparts.com : PARTS DATABASE

and pop your hood.

2. Remove the two flathead screws (circled) until they won't unscrew anymore (it'll make sense when you do it - they're a weird kind of screw) You can take the old cover off at this time.

3. Using the 10mm socket wrench, Remove the 2 bolts circled (covered by the new cover in the picture....you'll find them, especially if you try putting the new cover on.)

For steps 2 & 3:

The finished product:

Enjoy!!!

01-12-2007, 06:48 PM	#1 (permalink)
Sion0x Senior Member Join Date: Dec 2006 Location: Tempe, AZ Age: 23 Posts: 531 Derek	DIY: JDM engine cover Tools needed: flat head screwdriver, socket wrench with extension and 10mm socket. EASY mod, looks great. 1. Get your JDM engine cover japanparts.com : PARTS DATABASE and pop your hood. 2. Remove the two flathead screws (circled) until they won't unscrew anymore (it'll make sense when you do it - they're a weird kind of screw) You can take the old cover off at this time. 3. Using the 10mm socket wrench, Remove the 2 bolts circled (covered by the new cover in the picture....you'll find them, especially if you try putting the new cover on.) For steps 2 & 3: The finished product: Enjoy!!!
	Tweet