Quote:
Originally Posted by trehouse
A lot of people seem to have this kind of problem. The usual answer from DDM is to check your connections and if the problem persists swap the sides the ballasts are on to see if the problem follows to that side pointing to a bad ballast.
BTW, reading your install thread if you have stock 9006 bulbs are you using the jumpers which came with the kit and if not perhaps you can try them to see if you can get a more solid connection? If you are using them, is the ballast mounted close enough on the left side to take it out? For me however, I couldn't do the install w/o the jumper due to connector issues. As I think someone may have mentioned, this problem you are having with the connection is not typical.
Also, I'm curious if these are full size ballasts or slim. I have DDM full sized ballasts and I haven't seen this problem so far. I'm in CT so it's also like Antarctica here.
|
I have the slim ballasts. I do not understand what "jumper" you are talking about. I just connected the bulbs ballast and harness together with my friend, and he did most of the actual hookup.