Quote:
Originally Posted by Wakeboarder11
80 ft/lbs is basically the pressure applied to the wheel by each lugnut.
Buy a torque wrench and set it to 80 ft/lbs and basically when your tightening it, the wrench will "snap" when you reached the required tightness which signals you that you dont have to go any further.
|
Will do! Damn...i didnt know that there is a certain limit to the pressure that you have to apply to the lug nuts when reinstalling the wheels, normally i would just think to tighten the lugs nuts till it feels tight but not extremly tight, thanks for the info! I should be painting my calipers sometime withnin the next few months. Again, thanks for the DIY.