|
gbae: ironically, the "extra" cost to go from a xenon retrofit to an adaptive xenon retrofit was only about $60-70. And I definitely don't have the cash for a Lexus... wish I did though :)
truflip: the difficulty level isn't huge... my diy should be fairly easy to follow once I come out with it. The problem is that some of the extra parts needed will require machining equipment, i.e. lathe, mill and finger brake. Luckily we have these at work and I'm allowed to use them for my own stuff on off-hours, but most people don't have access to that stuff. It might be possible without that equipment by changing some things around, but I'm not sure. It's hard to explain right now because everything's still in my head but not on paper :)
|