Quote:
Originally Posted by striker_1818
you don't sand the scosche kit to get it to fit. It fits perfectly fine. You just have to center the a/c control and screw it in. Otherwise, it will be offsetted by 1/8" of an inch or 1/32" which will make the buttons get stuck.
|
I did correctly mount the a/c controls. There's really no logic to it. It goes on only one possible way. I tightened the screws and the buttons would get stuck when I pushed them in. If I loosened the screws it was fine but then the unit looked loose and would wiggle. No big deal, I sanded it down very lightly and it's perfect.