|
It took me a while and plenty of doubt, but I used the one right above the accelerator. I managed to get 8ga through there without any problems, I'd say 4ga would fit easily too, 2/1/0 might need to have some drilling done to expand it, there's a black bit of tubing in there already, but it houses a 22ga wire, so you can easily fit everything else alright, It comes through into the engine bay behind the intake chamber. A little down and to the left. It's a perfect spot to run cable if you're going to take out the center console and channel all power through there. So much easier than taking off the trim panels along the doors etc. Good luck!
|