|
it takes patience and some good good hand dexterity to install those shifters. I had a problem with 3rd gear and 3rd gear only because i stretched one of the cables under the hood. I was trying to put the small cable bushing on the shifter end ring but didn't unbolt the cable mount completely off because i was in a hurry to get it on there so i put some multipurpose grease around the sides of the bushing then tryed to force it on the cable ring end by hammering on it realizing that i could of got on easier by taking the cable mounts off. The bushing has to be completely straight on top of the ring to fit because it fits flush tight it just needs a little grease to slide on easy. Now i corrected third gear problem by shifting in a certain way to make it go in.It dosen't get in 3rd gear mostly when i down shift from a turn.
|