8th Generation Honda Civic Forum - View Single Post

bouncer07 · 12-14-2008, 12:20 AM

I bent the hell out of the short shifter after trying to take the blue cap off and installed it back into my stock shifter. I did however installed it and drove it around the block. I could shift to all gears but grinds because of the shift cable being rubbing on the plastic ( the black piece that goes over the blue ball ) . I do have to force it to go into 2nd but decided I don't want to drive it like that. sileentkillz1, that's the exact same problem I am having.

I don't think I could ship it back with the bottom bent alittle. Trying to take the blue ball off that thing was worst than when it was on the stock one. I do buy alot of things from CorSports but this was one item ever that had this fittment issue. But I am not just the only one with this problem.

12-14-2008, 12:20 AM	#6 (permalink)
bouncer07 Senior Member Join Date: Aug 2008 Posts: 3,644 Gnehp Gnoix	I bent the hell out of the short shifter after trying to take the blue cap off and installed it back into my stock shifter. I did however installed it and drove it around the block. I could shift to all gears but grinds because of the shift cable being rubbing on the plastic ( the black piece that goes over the blue ball ) . I do have to force it to go into 2nd but decided I don't want to drive it like that. sileentkillz1, that's the exact same problem I am having. I don't think I could ship it back with the bottom bent alittle. Trying to take the blue ball off that thing was worst than when it was on the stock one. I do buy alot of things from CorSports but this was one item ever that had this fittment issue. But I am not just the only one with this problem. Last edited by bouncer07; 12-14-2008 at 12:29 AM.