Quote:
Originally Posted by aki
Might be a cruddy shop that doesn't know what they're doing. The bolts should provide +/- 1.5 degs of adjustment--which usually ends up to like 1-1.5 degrees. You can also get two sets of camber bolts, which is what I did.
|
I was there when they were doing the fronts, and to adjust the camber, ur suppose to just spin the bolt around right? And when we were turning the bolt, the camber didnt move at all on the drivers, and only 0.5 degrees on the passanger.
Quote:
Originally Posted by Zeuceone
Bottom hole not top
|
I dont think its suppose to be on the bottom of the two holes, both Diy's on this forum as well as the instructions said on top.