View Single Post
Old 12-06-2006, 07:20 PM   #6 (permalink)
BATANG CITY JAIL
Senior Member
 
BATANG CITY JAIL's Avatar
 
Join Date: Jul 2006
Location: Durham, NC..£╖╒◙o├æ
Posts: 8,313
iTrader: 10 / 100%
Quote:
Originally Posted by airportguy770
How much harder would this be if it was done using just jack stands is there enough room to do this without a lift?

Also, Where can you get those of those "big ass syringes" is that a cheap tool that can be picked up at autozone, advanced out etc....
you can do it with jack stands, once your under the car you can basically have an access to thoes bolts, and i did'nt expect to unbolt those bolts easily.


the trick is, once you loosen them up, move out, then unbolt it by your hand slowly, the oil will just shoot out and will make a mess.

yes you can find those syringe in any auto store, i don't know how much it cost but those stuff will came in handy specially if you wana drain some fluid like brake fluid,clutch fluid, etc.etc...

if you do it on the jack stand take your right wheel off , make sure that you have long hose so you can access the fill hole at the side.. and make sure that the car is even....
BATANG CITY JAIL is offline   Reply With Quote