8th Generation Honda Civic Forum - View Single Post

prizm5063 · 09-18-2008, 05:50 PM

If you upgrade the fuel pump,rail, and add return lines, then you will most likely need to add a piggyback controller. Or you hard wire in a standalone/piggy back like 07CivicMD did. I don't think using your NST pulley's is a good idea either. I ready something awhile back, and I believe on their website, that you should not use them. I do believe they have an upgrade/alternate pulley setup though that is designed for our cars running a SC.

I know with the CT setup some, not all, were having trouble with their CAI and bogging. I personally use an X-intake, but my IAT suck. Working on a custom CAI setup right now.

09-18-2008, 05:50 PM	#2 (permalink)
prizm5063 Senior Member Join Date: Aug 2007 Location: Phoenix Posts: 632 Mark	If you upgrade the fuel pump,rail, and add return lines, then you will most likely need to add a piggyback controller. Or you hard wire in a standalone/piggy back like 07CivicMD did. I don't think using your NST pulley's is a good idea either. I ready something awhile back, and I believe on their website, that you should not use them. I do believe they have an upgrade/alternate pulley setup though that is designed for our cars running a SC. I know with the CT setup some, not all, were having trouble with their CAI and bogging. I personally use an X-intake, but my IAT suck. Working on a custom CAI setup right now. Last edited by prizm5063; 09-18-2008 at 05:52 PM.