8th Generation Honda Civic Forum - View Single Post - CTR Push start button DIY install w/pics and wiring diagram
View Single Post
Old 09-12-2008, 01:51 AM   #6 (permalink)
menotakoala
Senior Member
 
menotakoala's Avatar
 
Join Date: Feb 2008
Location: Unknown (might want to check your backyard)
Age: 25
Posts: 404
Joe
Quote:
Originally Posted by Seemund View Post
1- Where did you get the bezel at? How much?
Start Button Housing (Click Here)
1A) While you're at it, might want to consider the CTR hazard switch; the CTR Upper Gauge cluster; the lower gauge cluster; and the CTR Steering Wheel which has RED stitching.

Quote:
Originally Posted by Seemund View Post
2- Would this small mod VOID my warranty (Electrical part.. let's say car starts to blow fuses, etc?)
Very much will void your warranty if it is found to be the root cause all your fuses blowing out. If you however ask the stealership to do this for you, then no.

Quote:
Originally Posted by Seemund View Post
3- GOOD JOB.

Last edited by menotakoala; 09-12-2008 at 08:43 PM.
menotakoala is offline   Reply With Quote