Quote:
Originally Posted by FG2xTK
I ran a wire from my power on the harness to the factory amp, its the only way i could seem to get the factory speakers to work, but the static was horrible i put the stock radio back in, can someone help me get rid of the distortion?
|
You cannot get the factory amp and speakers to work like that man. You need to either use a LOC module or the RCA method (discussed in this forum and other places on 8thcivic).
Tapping into the factory amp like that is going to damage your speakers and even burn out the factory amp.
I did mine by using the RCA cables and that integrates with the factory amp. You will be able to use all speakers without a problem. Do be sure to tap PIN# 15 on the bigger factor harness to the remote wire of your aftermarket radio. If you don't do that you will get NO sound whatsoever because I had that issue. It's all a matter of trial and error =)