[CameronJr9]

Originally Posted by derek1324

What did you splice solder and tape your dvd power and interface to on the radio harness?

Originally Posted by CameronJr9

Step 6: Find this harness. That’s where you get power for your DVD player and Interface.


From the car’s harness, the purple wire is your ignition wire, and the black wire is your ground. Of course, you’ll want to use your voltmeter to double check. On the Interface, the solid black wire is the ground wire, while the black/grey wire is your power wire. Splice, solder, and tape your power wires from your DVD player and your Interface here.

Hope that answers your question.