8th Generation Honda Civic Forum - View Single Post - D.I.Y. the long-awaited amp integration harness by Whiterice!

WolfSong · 07-22-2008, 01:20 PM

First of all, very good writeup... I was going to use a Quick Connect harness and a Parrot system to get Bluetooth into my Si... and from the looks of this, I can instead use my Pioneer DEH-P980BT headunit hooked up this way.

I did have a little question though as far as output voltage on the line outs. My HU has 5V 100 ohm output on it's line outs, and most of the other HU's I've seen have lower line output voltages (2-4V). Does anyone know if this would be an issue with using this method to input to the factory amp?

Sorry if this is a newb question, but I want to make sure that it's not going to tear up my factory amp.

Thanks again for the writeup.

Derek

07-22-2008, 01:20 PM	#114 (permalink)
WolfSong Senior Member Join Date: Jul 2008 Location: Myrtle Beach, SC Age: 44 Posts: 534 Derek Western	Line Output Voltage Question First of all, very good writeup... I was going to use a Quick Connect harness and a Parrot system to get Bluetooth into my Si... and from the looks of this, I can instead use my Pioneer DEH-P980BT headunit hooked up this way. I did have a little question though as far as output voltage on the line outs. My HU has 5V 100 ohm output on it's line outs, and most of the other HU's I've seen have lower line output voltages (2-4V). Does anyone know if this would be an issue with using this method to input to the factory amp? Sorry if this is a newb question, but I want to make sure that it's not going to tear up my factory amp. Thanks again for the writeup. Derek