[striker_1818]

Originally Posted by LoadStar

Ok, progress so far...

I understand that the metra harness may be better made, but I have the Scosche harness here, so I'm going to use it and give it a try, at least initially.

I've got the audio leads from the Scosche harness (white, white/black, gray, gray/black, green, green/black, violet, violet/black) connected to the matching color on the black AVIC harness.

Similarly, I've got the yellow, orange-white, and red wires from the Scosche harness connected to the matching colors on the black AVIC harness.

I have left coming out of the Scosche harness: orange/black (labeled "Dimmer Ground"), pink ("TEL"), green/white (unlabeled), black/white ("Amp Lifier [sic] Ground"), black ("Chassis Ground 12V-"), and brown ("Mute").

Similarly, I have coming out of the black AVIC harness the "Parking Brake" seafoam green cable, the "Car Speed Signal Input" pink cable, "Reverse Gear Signal Input" purple/white cable, and black.

Which of these cables do I connect together? Which do not connect at all?

Scosche has a misplaced wire(the acc wire i think) But I just made a few schematic

Here is the Metra kit(looking at it from the front with the wires on the back)


here is an schematic of the avic-d3 plugs(looking at the plug from the back(looking at the wires))