|
I installed my power wire in my 06 DX-g today but I used the grommet above the hood cable to run it. Iused a piece of semi stiff wire to run from the hole into my frontg fender until I could see the wire. I then ran my power wire threw the hole in the plastic cover from the inside of the hood and then taped it to the piece if wire I was using to fish it threw. It came threw so easy. I drilled a hole right in the middle of the grommet and my wire slid threw perfectly. Tucked it under all my plastic interior panels along the drivers side. Fished it up under the rear seat the same way I pulled it threw the firewall and into the trunk. It took about 30 minutes tops, easy as pie.
|