8th Generation Honda Civic Forum - View Single Post - Skunk2 Pro-S Coilovers on a NHBP FA5 ***Pics inside***

damnu · 05-13-2008, 01:55 AM

Order of picture

1. The stock OEM washer on the top of the rear strut right below the nylon nut. The 2nd one is just a similiar size washer i picked up at ACE Hardware, sorry but i forgot what size it was, just go in with that OEM washer to match.

2. Yup Pro-S, the "rubber thing" are the OEM rubber bushings. One is below the car and one is above.

3. The "rubber thing" comes right off, its not attached in anyway but by friction. If you buy the washer from a hardware store, then you wont need to take off the "strut washer". In order to do that you need to drill out the dimple

and pull out the washer. I didnt have a drill with me, so i just bought the washer instead; its your call on which route you take.

05-13-2008, 01:55 AM	#120 (permalink)
damnu Senior Member Join Date: Mar 2007 Location: San Ramon Posts: 338 iTrader: 1 / 100%	Order of picture 1. The stock OEM washer on the top of the rear strut right below the nylon nut. The 2nd one is just a similiar size washer i picked up at ACE Hardware, sorry but i forgot what size it was, just go in with that OEM washer to match. 2. Yup Pro-S, the "rubber thing" are the OEM rubber bushings. One is below the car and one is above. 3. The "rubber thing" comes right off, its not attached in anyway but by friction. If you buy the washer from a hardware store, then you wont need to take off the "strut washer". In order to do that you need to drill out the dimple and pull out the washer. I didnt have a drill with me, so i just bought the washer instead; its your call on which route you take.